5KG Bostik LAYBOND VINYL High strength adhesive for vinyl floor coverings 5kg

Condition: New

High strength, acrylic dispersion adhesive, formulated to produce a high degree of tack in dry film and to minimise the effects of plasticiser migration. Off-white appearance and minimal odour. Suitable for all vinyl floor coverings and for bonding most carpets.

YOUR SMART ADVANTAGESAcrylic dispersion adhesiveSuperior performanceComplete vinyl floor covering adhesiveUSESBostik Laybond Vinyl flooring adhesive is a high strength, acrylic dispersion adhesive specially formulated forvinyl floor coverings to produce a high degree of tack in dry film and to minimise the effects of plasticiser migration. It has an off white appearance and minimal odour.It is a multipurpose floor covering adhesive for internal use. It will bond most PVC sheet (including cushion types) and tiles as well as most carpets to most common substrates. It can be applied to asphalt, concrete, sand/cement screeds, chipboard, hardboard, plywood and smoothing compounds


TYPICAL PERFORMANCE DATA(approx.)Coverage40-50m² per 15kg when using a 1.5 x 5mm notched trowel.Application Temperature5°C to 40°C Service TemperatureUp to 40°C


PREPARATION Subfloor:1.Ensure the subfloor is clean, sound, dry and free from contaminants that may hinder adhesion. 2.The subfloor should be tested in accordance with British Standards using a properly calibrated and insulated hygrometer. 3.A reading of 75% RH or less confirms that the subfloor is satisfactorily dry. Where this has not been attained,it is necessary to apply a Bostik Screedmaster surface membrane to suppress residual moisture.
4.Mechanically remove any surface treatments on concrete bases 5.Repair any deep indentations in the subfloor with Bostik Screedmaster Rapid Repair Mortar and apply a suitable Bostik Screedmaster smoothing compound at a minimum thickness of 3mm.Existing Floor Coverings: 6.Bonding over existing floor coverings should be avoided as results cannotbe guaranteed.
PRIMING7.Surfaces should be thoroughly cleaned andvacuumed. Prime boards and other porous surfaces with diluted Bostik Screedmaster Universal Primer (dilute 2 parts water to 1 part Bostik Screedmaster Universal Primer) and allow to dry. This is particularly important with hardboard, chipboard and plywood. Ensure that the floor covering manufacturer recommends the floor covering for use with the particular substrate.
APPLICATION Porous Surfaces: 8.For smooth backed coverings use a triangular-notched trowel cut 1.5mm deep at 5mm centres. Spread adhesive evenly over substrate with a sweeping motion at a 60° angle. The floor covering must be placed into the wet adhesive. Apply even pressure to ensure good overall contact. (e.g. with a 68kg roller). For embossed floor coverings increase trowel notch size (2mm deep at 6mm centres).Non/Low-Porous Surfaces:
9.Ensure that the flooris primed. Apply a suitable Bostik Screedmaster smoothing compound at a minimum depth of 3mm and allow to dry overnight.
Application can then proceed as for Porous Surfaces.
CLEANING 10.Clean toolsand equipment immediately after use with warm water.
Do not allow to dry.
Remove any adhesive from the surface of the floor covering with a damp cloth


£14.75

Bostik Laybond

Business, Office & Industrial:Adhesives, Sealants & Tapes:Adhesive Tapes

Out of stock


Condition: New

High strength, acrylic dispersion adhesive, formulated to produce a high degree of tack in dry film and to minimise the effects of plasticiser migration. Off-white appearance and minimal odour. Suitable for all vinyl floor coverings and for bonding most carpets.

YOUR SMART ADVANTAGESAcrylic dispersion adhesiveSuperior performanceComplete vinyl floor covering adhesiveUSESBostik Laybond Vinyl flooring adhesive is a high strength, acrylic dispersion adhesive specially formulated forvinyl floor coverings to produce a high degree of tack in dry film and to minimise the effects of plasticiser migration. It has an off white appearance and minimal odour.It is a multipurpose floor covering adhesive for internal use. It will bond most PVC sheet (including cushion types) and tiles as well as most carpets to most common substrates. It can be applied to asphalt, concrete, sand/cement screeds, chipboard, hardboard, plywood and smoothing compounds


TYPICAL PERFORMANCE DATA(approx.)Coverage40-50m² per 15kg when using a 1.5 x 5mm notched trowel.Application Temperature5°C to 40°C Service TemperatureUp to 40°C


PREPARATION Subfloor:1.Ensure the subfloor is clean, sound, dry and free from contaminants that may hinder adhesion. 2.The subfloor should be tested in accordance with British Standards using a properly calibrated and insulated hygrometer. 3.A reading of 75% RH or less confirms that the subfloor is satisfactorily dry. Where this has not been attained,it is necessary to apply a Bostik Screedmaster surface membrane to suppress residual moisture.
4.Mechanically remove any surface treatments on concrete bases 5.Repair any deep indentations in the subfloor with Bostik Screedmaster Rapid Repair Mortar and apply a suitable Bostik Screedmaster smoothing compound at a minimum thickness of 3mm.Existing Floor Coverings: 6.Bonding over existing floor coverings should be avoided as results cannotbe guaranteed.
PRIMING7.Surfaces should be thoroughly cleaned andvacuumed. Prime boards and other porous surfaces with diluted Bostik Screedmaster Universal Primer (dilute 2 parts water to 1 part Bostik Screedmaster Universal Primer) and allow to dry. This is particularly important with hardboard, chipboard and plywood. Ensure that the floor covering manufacturer recommends the floor covering for use with the particular substrate.
APPLICATION Porous Surfaces: 8.For smooth backed coverings use a triangular-notched trowel cut 1.5mm deep at 5mm centres. Spread adhesive evenly over substrate with a sweeping motion at a 60° angle. The floor covering must be placed into the wet adhesive. Apply even pressure to ensure good overall contact. (e.g. with a 68kg roller). For embossed floor coverings increase trowel notch size (2mm deep at 6mm centres).Non/Low-Porous Surfaces:
9.Ensure that the flooris primed. Apply a suitable Bostik Screedmaster smoothing compound at a minimum depth of 3mm and allow to dry overnight.
Application can then proceed as for Porous Surfaces.
CLEANING 10.Clean toolsand equipment immediately after use with warm water.
Do not allow to dry.
Remove any adhesive from the surface of the floor covering with a damp cloth